Hyundai 2" (50mm) Petrol Water Pump HY50
Availability: Out of stock
- 163cc Hyundai engine: Providing impressive and reliable pumping power.
- 2" intake and outake: Allowing 500 litres of water to be pumped every minute.
- Lightweight design: For easy transportation and storage.
- 3.6L fuel tank: Providing a long running time for uninterrupted pumping.
- Open frame: Protects the water pump from any knocks and bumps.
Powered by a 163cc Hyundai IC160 petrol engine which produces 5.5hp, enabling this pump to be used for domestic, commercial and professional pumping applications. It provides a maximum flow rate of 500 litres per minute, allowing you to rapidly transfer large pools of clean water. This impressive pumping power is made possible due to the large 2" (50mm) inlet and outlet.
Ideal for use on construction sites, in commercial work and for flood defence where a large transfer of water is necessary. It's designed to be used primarily in fresh water, the HY50 can pump particles up to 7mm in diameter, and provides a suction lift of 7m, and a total lift of 30m.
Weighing just 24kg, this is a lightweight water pump which is built with transportation and storage in mind. The sturdy open frame protects the pump from knocks and bumps and also functions as convenient carry handles.
The HY50 is essentially a fresh water pump and is not suitable for use with seawater or other chemicals as this may cause damage to its internal components. This water pump is the ideal machine to have on standby in case of flooding as it minimises any damage that may be caused to your home or garage.
All Hyundai water pumps are supplied with a Hyundai 3 year platinum warranty.
Gross Weight (kg) 25.50 Engine Type Hyundai IC160 - 4-stroke, OHV, single cylinder Engine Size (cc) 163.00 Fuel Tank (L) 3.60 Fuel Type Petrol Oil Capacity (L) 0.60 Noise Level (dB) 104.00 Maximum Power @ 3600rpm (hp/kw) 5.5/4.2 Drive Type Direct drive Starting Method Recoil Inlet (inches / mm) 2/50 Outlet (inches / mm) 2/50 Maximum Flow Rate (L/min) 500.00 Impeller Type Cast Iron Pump Type Aluminium housing Total Lift (m) 30.00 Suction Lift (m) 7.00 Maximum Solids (mm)* 7.00 Boxed Dimensions L x W x H (mm) 520 x 410 x 430 Fully Assembled Dimensions L x W x H (mm) 510 x 400 x 420
*Risk of damage to the applicance.
The particle size mentioned does not refer to sand or stones but rather to soft flexible particles such as fluff and similar which the rotor cannot wedge inside the pump.
Write Your Own Review
Frequently Asked Questions
Q. How long can i run this indoors safely?
A. NO!! we strongly recommend that you never use any petrol/diesel powered machine indoors. however as regards this water pump we can also supply a suction hose to run from outdoors to the mass of water you wish to extract.
Do you have a question regarding this product?
* required fields